HashFlare

Майнер etc - Майнер

Криптотрактор предлагает вам самую актуальную информацию о криптовалютах. Только современные и модные способы заработка, никакой воды и сомнительных методов. Научись зарабатывать на блокчейне и стань миллионером!

HashFlare

Attempts to cheat and remove dev fee will cause a bit slower mining speed same as "-nofee 1" though miner will show same hashrate. Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks.

If miner does not show any errors or slowdowns, they are happy. This version is for recent AMD videocards only: Recent nVidia videocards are supported as well. There are builds for Windows x64 and for Linux x64 tested on Ubuntu 12. Only Stratum protocol is supported for pools. Miner supports all pools that are compatible with Dwarfpool proxy and accept Ethereum wallet address directly.

For solo mining, specify "http: Also worker name and other options if pool supports it.

Ethereum miner - MinerGate

Pools that require "Login. Worker" instead of wallet address are not supported directly currently, but you can use "-allpools 1" option to mine there. You can also set this option for every card individually, for example "-etha 0,1,0".

Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1". Use them if you get best speed at "-dcri 1" i. The most low GPU load is "-ethi 0". Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6".

V. 6.4 – Ethereum classic (ETC) mining - Official Minergate Blog

You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" parameter which is used in official miner.

To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation. This setting defines how many epochs miner must foresee when it reserves GPU buffer, i. Default value is 2. Note that if devfee mining pools will stop, entire mining will be stopped too.

Therefore for this mode it is recommended to specify current Ethereum epoch or a bit larger value , for example, "-allcoins 47" means that miner will expect DAG size for epoch 47 and will allocate appropriate GPU buffer at starting, instead of reallocating bigger GPU buffer may crash when it starts devfee mining. Another option is to specify "-allcoins -1", in this mode miner will start devfee round immediately after start and therefore will get current epoch for Ethereum, after that it will be able to mine Ethereum fork.

If you mine ETC on some pool that does not accept wallet address but requires Username. Default value is 200ms. If prefix is missed, Stratum is assumed. For systems with more than 10 GPUs: It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.

Default value is "0" no serialization, fast initialization. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs 0 and 2. Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc", "-dcoin pasc". Default value is "dcr". You can also specify values for every card, for example "-dcri 30,100,50".

Default value is 5 seconds. Default value is 30 minutes, set zero if there is no main pool. Default value is "-wd 1", it enables watchdog, miner will be closed or restarted, see "-r" option if any thread is not responding for 1 minute or OpenCL call failed.

Specify "-wd 0" to disable watchdog. For example, "-r 60" - restart miner every hour or when some GPU failed. So you can create "reboot.

If miner cannot reach this speed for 5 minutes for any reason, miner will be restarted or "reboot. Default value is 0 feature disabled. Default values is "20". After restart, miner will append new log data to the same file.

If you want to clear old log data, file name must contain "noappend" string. If missed, default file name will be used. Specify "-logsmaxsize 0" to cancel old logs removal. Default value is 1000 i. So you have a choice: You can also specify epoch number for benchmark, for example, "-benchmark 110". Reduces mining intensity, useful if your cards are overheated.

Note that mining speed is reduced too. More value means less heat and mining speed, for example, "-li 10" is less heat and mining speed than "-li 1". You can also specify values for every card, for example "-li 3,10,50".

Default value is "0" - no low intensity mode. Supported values are 0, 1, 2, 3, more value means lower intensity.

Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)

You can also specify values for every card, for example "-lidag 1,0,3". Default value is "0" no low intensity for DAG generation. If miner does not get new jobs for this time, it will disconnect from pool. Default value is 10. Default value is 30. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75". Specify zero to disable control and hide GPU statistics.

You can see current Decred intensity coefficients in detailed statistics "s" key. You can also specify values for every card, for example "-ttdcr 80,85,80". You also should specify non-zero value for "-tt" option to enable this option. It is a good idea to set "-ttdcr" value higher than "-tt" value by 3-5C. For example, "-ttli 80" reduces mining intensity if GPU temperature is above 80C.

You can see if intensity was reduced in detailed statistics "s" key. You can also specify values for every card, for example "-ttli 80,85,80". It is a good idea to set "-ttli" value higher than "-tt" value by 3-5C.

For example, "-tstop 95" means 95C temperature. You can also specify values for every card, for example "-tstop 95,85,90". This feature is disabled by default "-tstop 0".

If it turned off wrong card, it will close miner in 30 seconds. You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop -95" will close miner as soon as any GPU reach 95C temperature. You can also specify values for every card, for example "-fanmax 50,60,70".

This option works only if miner manages cooling, i. Default value is "100". You can also specify values for every card, for example "-fanmin 50,60,70".

Default value is "0".

If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".

By default, low power states have low voltage, setting high GPU clock for low power states without increasing voltage can cause driver crash. You can also specify values for every card, for example "-mclock 1200,1250,1200,0". If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10".

For example, "-cvddc 1050" means 1. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows. For example, "-mvddc 1050" means 1.

You can also specify values for every card, for example "-mvddc 900,950,1000,970". Specify negative value to enable monitoring get statistics but disable management restart, uploading files , for example, "-mport -3333" enables port 3333 for remote monitoring, but remote management will be blocked.

You can also use your web browser to see current miner state, for example, type "localhost: By default, miner will accept connections on specified port on all network adapters, but you can select desired network interface directly, for example, "-mport 127.

Дата: 23.10.2017